Netgear WC7520 User Manual Page 100

  • Download
  • Add to my manuals
  • Print
  • Page
    / 213
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 99
Configuring Wireless and QoS Settings
100
ProSafe 20-AP Wireless Controller WC7520
To change the channel allocation:
1. Select Configuration > Wireless > Basic > Channel Allocation. The Channel
Allocation screen displays:
Figure 46.
2. Configure the settings as explained in the following table:
Table 23. Channel allocation settings
Setting Description
Automatic channel allocation Ensure that the Enable radi
o button is selected during normal
operation. Automatic channel allocation distributes channels across
the managed access points to reduce interference. To disable
automatic channel allocation, select the Disable radio button.
Valid corporate channels Specify the wireless band by selecting the 2.4 GHz or 5 GHz check
box. For each wireless band, the following applies:
• You can remove one or more channels from the list of available
ch
annels by clearing its check box. This is a good way to avoid
interference with competing equipment such as in a medical
setting where medical devices use a specific channel.
• You cannot add channels. The wireless controller determines
avail
able channels based on the country or region that you
specified on the General Settings screen (see Configure General
Settings on
page 63).
Page view 99
1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 212 213

Comments to this Manuals

No comments