Configuring Network Settings
71
ProSafe 20-AP Wireless Controller WC7520
Configure Syslog and Alarm Notification Settings
From the Alerts menu you can configure the syslog and the alarms, and specify the email
address from which alerts originate.
Configure Syslog Settings
This screen lets you configure the settings to connect to a syslog server, if you have one
configured in your network.
To configure Syslog settings:
1. Select Con
figuration > System > Alerts > Syslog. The Syslog Settings screen
displays:
Figure 33.
2. Configure the settings as explained in the following table:
3. Click App
ly to save your settings.
Table 13. Syslog settings
Setting Description
Enable Syslog Enable the syslog settings, if you have a syslog server on your network.
Syslog Server IP Address Enter the IP address to which the wireless controller and managed access
point
s will send all syslogs, if the Syslog check box is selected.
Server Port Number Enter the number of the port at which your syslog
server is configured to listen to
requests.
Comments to this Manuals