Netgear WC7520 User Manual Page 79

  • Download
  • Add to my manuals
  • Print
  • Page
    / 213
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 78
Managing Security Profiles and Profile Groups
79
ProSafe 20-AP Wireless Controller WC7520
Client Authentication section
Note: The options that display onscreen depend on the selecti
on from Network Authentication drop-down
list.
Network Authentication From the drop-down list, select the authentication type to be used: see
Table 16 on p
age 81.
Data Encryption From the drop-down list, select the data encryption type to be used. The
options available for data encryption as well as other requirements such as
entering a key or passphrase depend on the network authentication settings:
see Table 16 on
page 81.
Wireless Client Security
Se
paration
From the drop-down list, select Disable to prevent associated wireless clients
from communicating with each other or Enable to allow such communication.
Wireless client separation is intended for hotspots and other public access
situations.
VLAN Enter the VLAN ID to be associated with this secur
ity profile. This VLAN ID
needs to match the VLAN ID that is used by other network devices.
Authentication Settings section
Note: The options that display onscreen depend on the selecti
on from Network Authentication drop-down
list.
Open System, Shared
K
ey, WPA-PSK,
WPA2-PSK, and
WPA-PSK & WPA2-PSK
MAC ACL Select one of the following radio buttons:
Lo
cal. Use local MAC authentication. The Local MAC ACL
Group drop-down list displays so you can select a group. For
more information, see Manage MAC Authentication and MAC
Authentication Groups o
n page 117.
External. Use external MAC authentication. The External
Radius Server drop-down list displays so you can select a
server. You can use either the basic-Auth RADIUS server or
a RADIUS server of an advanced authentication group. You
cannot use the external LDAP server. For information about
setting up and enabling internal and external authentication
servers, see Manage Authentication Servers and
Authentication Server Groups on
page 122.
Note: The MAC ACL radio buttons do not display onscreen if
the network authentication uses an external RADIUS server.
The reason for this is that you can configure either MAC
au
thentication with an external RADIUS server or network
authentication with an external RADIUS server, but not both.
That is, if you configure an external RADIUS server with WPA,
WPA2, or WPA & WPA2 (or you use Legacy 802.1X) , you
cannot use external MAC authentication, and the MAC ACL
radio buttons do not display on screen. You still can use
internal MAC authentication.
Table 15. Basic security profile definition settings (continued)
Setting Description
Page view 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 212 213

Comments to this Manuals

No comments