Netgear WG111v3 User's Guide download pdf (Page 37)

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual

2-13

v1.0, March 2008

3. Click Initiate Ad Hoc. The Ad Hoc Setting screen displays:

4. In the Start Ad Hoc field, choose the wireless standard (802.11b, or 802.11g) for your Ad Hoc

computer-to-computer network.

5. In the Channel field, Automatic should work.

6. Click OK. The wireless adapter automatically selects the highest connection speed.

Wireless Security

Many networks use wireless security to encrypt wireless data communications. If you try to

connect to a network with wireless security the Smart Wizard detects it. Before you can use that

network you must set up the Wireless Adapter with exactly the same kind of wireless security

settings. The wireless adapter supports the following types of wireless security:

• Wi-Fi Protected Access 2 Pre-Shared Key (WPA2-PSK)

• Wi-Fi Protected Access Pre-Shared Key (WPA-PSK)

• Wired Equivalent Privacy (WEP)

For more information about wireless security, see the wireless reference document at:

http://documentation.netgear.com/reference/enu/wireless/index.htm. In addition to the wireless

security features, networks should use LAN network security features such as requiring a user

name and password to access the shared resources in the network.

Figure 2-11

Note: If there is interference from another nearby wireless device, use the Networks

tab to see which channels are in use in your area. Then use a different channel.

For example, if your neighbors use Channel 6 and the signal strength is strong,

then channels 4-8 would probably be poor choices for you.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 53 54

No comments

Netgear WG111v3 User's Guide Page 37