Netgear WG111v3 User's Guide download pdf (Page 29)

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual

2-5

v1.0, March 2008

3. Select a network from the drop-down list. If you select a hidden network then you must enter

the SSID. Click Next.

4. Follow the steps of the wizard to specify the wireless security key (if used), and to create a

profile.

5. Review your settings, and click Finish.

6. You can use the Status Bar to verify your network connection. For more information, see

“Smart Wizard Status Bar” on page 1-8. Click Close to exit the Smart Wizard.

Using WPS to Connect to a Wireless Network

If an access point or router in the wireless network that you are trying to connect to supports WPS,

you can use WPS to set up the wireless settings of your wireless adapter and connect securely to

the access point or router.

An access point or router that supports WPS has a WPS symbol. Some NETGEAR products

include NETGEAR’s Push 'N' Connect feature. This feature is based on the Wi-Fi Protected Setup

(WPS) standard (for more information, see

http://www.wi-fi.org). WPS automatically configures

the network name (SSID) and wireless security for the access point or router and the wireless

adapter. Note that WPS is not a new security feature—it makes existing security features easier to

configure.

Figure 2-3

Note: The NETGEAR 54 Mbps Wireless USB2.0 Adapter WG111v3 only supports

WPS on Windows 2000, XP, XP x64 and Vista (32/64 bits).

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 53 54

No comments

Netgear WG111v3 User's Guide Page 29