Netgear WG111v3 User's Guide Page 39

  • Download
  • Add to my manuals
  • Print
  • Page
    / 54
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 38
NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual
2-15
v1.0, March 2008
Setting up WEP Encryption Security
Follow the steps below to configure WEP Encryption Security.
1. Run the WG111v3 Smart Wizard.
a. Make sure that the software is installed and your wireless adapter is in the USB port in
your computer.
b. Use the icon to open the Smart Wizard. The Settings screen displays.
2. Configure the security settings.
a. In the Profile field, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c. In the Security section of the screen, select WEP.
3. Select the WEP encryption strength you will use.
Figure 2-12
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
Page view 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 53 54

Comments to this Manuals

No comments