NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual
2-17
v1.0, March 2008
b. Use the icon to open the Smart Wizard. The Settings screen displays.
2. Configure the security settings.
a. In the Profile field, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c. In the Security section of the screen, select WPA2-PSK [AES].
For more information about WPA2-PSK security, see the Web link to “Wireless
Communications” on page B-1.
3. Save your settings in a profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the Smart Wizard.
Setting up WPA-PSK Security
Follow the steps below to configure WPA-PSK Security.
1. Run the wireless adapter Smart Wizard.
a. Make sure that the software is installed and the wireless adapter is fully inserted in a USB
port in your computer.
Figure 2-13
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
Comments to this Manuals