Netgear R6300 User Manual download pdf (Page 98)

Advanced Settings

R6300v2 Smart WiFi Router

WPS. You can manually enable the PIN function by clearing the Disable Router’s PIN

check box.

3. (Optional) Select or clear the Keep Existing Wireless Settings check box.

By default, the Keep Existing Wireless Settings check box is selected. NETGEAR

recommends that you leave this check box selected.

If you clear this check box, the next time a new wireless client uses WPS to connect to

the router, the router wireless settings change to an automatically generated random

SSID and security key

4. Click the Apply button.

Your changes are saved.

Set Up a Wireless Access List by MAC Address

You can set up a list of computers and wireless devices that are allowed to join the wireless

network. This list is based on the unique MAC address of each computer and device.

Each network device has a MAC address, which is a unique 12-character physical address,

containing the hexadecimal characters 0–9, a–f, or A–F only, and separated by colons (for

example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the label of the wireless

device or network interface device. If you do not have access to the label, you can display the

MAC address using the network configuration utilities of the computer. You might also find

the MAC addresses in the Attached Devices screen.

 To restrict access based on MAC addresses:

1. Select ADV

ANCED > Advanced Setup > Wireless Settings.

2. Click the Setup Access

List button.

3. Click the Add button.

The Wireless Card Access Setup screen opens and displays a list of currently active

wireless cards and their Ethernet MAC addresses.

4. If the computer or device you want is in the

Available Wireless Cards list, select that radio

button; otherwise, type a name and the MAC address.

You can usually find the MAC address on the bottom of the wireless device.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 134 135

No comments

Netgear R6300 User Manual Page 98