Netgear R6300 User Manual download pdf (Page 112)

Advanced Settings

112

R6300v2 Smart WiFi Router

length of the prefix, which is also indicated by the underline (_) under the IPv6

address. If no address is acquired, the field displays Not Available.

• Router

’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired

for the router’s LAN interface. The number after the slash (/) is the length of the prefix,

which is also indicated by the underline (_) under the IPv6 address. If no address is

acquired, the field displays Not Available.

3. Specify how the router assigns IPv6 addresses to the devices on your home network (the

LAN) by selecting one of the following radio buttons:

• Use DHCP Server.

This method passes more information to LAN devices, but some

IPv6 systems might not support the DHCv6 client function.

• Auto Config.

This is the default setting.

4. (Optional) Select the Use This Interface ID check box, and specify the interface ID that you

want to be used for the IPv6 address of the router

’s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC

address.

5. Click the Apply button.

IPv6 Auto Config

 To set up an IPv6 Internet connection through auto configuration:

1. Select ADV

ANCED > Advanced Setup > IPv6.

The IPv6 screen displays.

2. In the Internet Connection

Type list, select Auto Config.

The screen adjusts:

The router automatically detects the information in the following fields:

• Router

’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired

for the router’s WAN (or Internet) interface. The number after the slash (/) is the

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 134 135

No comments

Netgear R6300 User Manual Page 112