Netgear R6300 User Manual download pdf (Page 38)

NETGEAR genie ADVANCED Home

R6300v2 Smart WiFi Router

3. Click the Apply button.

4. (Optional) If this service is disabled and no other DHCP server is on your network, set your

computer IP addresses manually so that they can access the router.

Set Up Address Reservation

When you specify a reserved IP address for a computer on the LAN, that computer always

receives the same IP address each time it accesses the router’s DHCP server. Assign

reserved IP addresses to computers or servers that require permanent IP settings.

 To reserve an IP address:

1. Select ADVANCED > Setup > LAN Setup.

2. In the Address Reservation section of the screen, click the Add button.

3. In the IP Address field, type the IP address to assign to the computer or server.

Choose an IP address from the router’s LAN subnet, such as 192.168.1.x.

4. Type the MAC address of the computer or server.

Tip: If the computer is already on your network, you can copy its MAC

address from the Attached Devices screen and paste it here.

5. Click the Apply button.

The reserved address is entered into the table.

The reserved address is not assigned until the next time the computer contacts the router’s

DHCP server. Reboot the computer, or access its IP configuration and force a DHCP release

and renew.

 To edit or delete a reserved address entry:

1. Select the radio button next to the reserved address you want to edit or delete.

2. Click Edit or Delete.

WPS Wizard for WiFi Connections

The WPS Wizard helps you add a wireless computer or device to your WiFi network without

typing the WiFi password.

 To use the WPS Wizard:

1. Select ADVANCED > WPS Wizard.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 134 135

No comments

Netgear R6300 User Manual Page 38