Netgear R6300 User Manual Page 110
- Page / 135
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Advanced Settings
110
R6300v2 Smart WiFi Router
any device to automatically control the resources, such as port forwarding (mapping), of
the router.
3. Type the advertisement period in minutes.
The advertisement period specifies how often the router broadcasts its UPnP information.
This value can range from 1 to 1440 minutes.
The default period is 30 minutes. Shorter
durations ensure that control points have current device status at the expense of more
network traffic. Longer durations can compromise the freshness of the device status, but
can significantly reduce network traffic.
4. T
ype the advertisement time to live in hops.
The time to live for the advertisement is measured in hops (steps) for each UPnP packet
sent. Hops are the steps a packet takes between routers.
The number of hops can range
from 1 to 255. The default value for the advertisement time to live is 4 hops, which should
be fine for most home networks. If you notice that some devices are not being updated or
reached correctly, it might be necessary to increase this value.
5. Click the Apply button.
The UPnP Portmap table displays the IP address of each UPnP device that is accessing
the router and which ports (internal and external) that device has opened.
The UPnP
Portmap table also displays what type of port is open and whether that port is still active
for each IP address.
6. (Optional)
To refresh the information in the UPnP Portmap table, click the Refresh button.
IPv6
You can use this feature to set up an IPv6 Internet connection type if genie does not detect it
automatically.
To set up an IPv6 Internet connection type:
1. Select ADV
ANCED > Advanced Setup > IPv6.
2. In the Internet Connection Type list, select the IPv6 connection type.
Your Internet service provider (ISP) can provide this information.
• If your ISP did not provide details, you can select IPv6 T
unnel.
• If you are not sure, select Auto Detect so that the router detects the IPv6 type that is
in use.
- R6300v2 Smart WiFi Router 1
- Compliance 2
- Trademarks 2
- Contents 3
- Chapter 5 USB Storage 4
- Chapter 6 ReadySHARE Printer 4
- Chapter 7 Security 4
- Chapter 8 Administration 5
- Chapter 9 Advanced Settings 5
- Chapter 10 Troubleshooting 6
- Hardware Setup 7
- Unpack Your Router 8
- Hardware Features 8
- Front and Side Panels 9
- Rear Panel 10
- Position Your Router 11
- Getting Started 12
- Router Setup Preparation 13
- Login and Access 13
- NETGEAR genie Setup 14
- Upgrade the Firmware 15
- Dashboard (BASIC Home Screen) 16
- Join Your Wireless Network 17
- NETGEAR genie Basic Settings 19
- Internet Setup 20
- Internet Setup Screen Fields 21
- Parental Controls 22
- Basic Wireless Settings 24
- Wireless Security Options 26
- Set Up a Guest Network 27
- To set up a guest network: 28
- View Attached Devices 29
- NETGEAR genie ADVANCED Home 30
- To use the Setup Wizard: 31
- WAN Setup 32
- Default DMZ Server 33
- Change the MTU Size 34
- LAN Setup 35
- LAN Setup Screen Settings 36
- Use Router as DHCP Server 37
- Address Reservation 37
- Set Up Address Reservation 38
- To disable WMM QoS: 40
- QoS for a Router LAN Port 42
- QoS for a MAC Address 42
- Bandwidth Control 44
- Enable Facebook WiFi 45
- Facebook WiFi is enabled 47
- USB Storage 48
- USB Drive Requirements 49
- Safely Remove a USB Drive 50
- Access the USB Storage Device 50
- Share Files 52
- Available Network Folders 56
- To edit a network folder: 57
- Specify Approved USB Devices 58
- Media Server Settings 59
- TiVo Support 60
- ReadySHARE Printer 62
- ReadySHARE Printer Utility 63
- Security 72
- To set up keyword blocking: 73
- To block services: 74
- Add a Custom Service 79
- Set Up Port Triggering 80
- To enable port triggering: 81
- Schedule Blocking 83
- Your settings are saved 85
- Administration 86
- Upgrade the Router Firmware 87
- View Router Status 88
- Show Statistics Button 89
- Connection Status Button 90
- To view logs: 91
- Manage the Configuration File 92
- Change the Password 93
- Password Recovery 94
- Advanced Wireless Settings 96
- Set Up a Wireless Schedule 97
- View or Change WPS Settings 97
- Wireless Access Point (AP) 99
- Cable this port to a LAN port 100
- To set up bridge mode: 101
- Advanced Settings 102
- Dynamic DNS 103
- R6300v2 Smart WiFi Router 105
- Static Routes 106
- To set up a static route: 107
- Remote Management 108
- Universal Plug and Play 109
- Auto Detect 111
- IPv6 Auto Config 112
- IPv6 6to4 Tunnel 113
- IPv6 Pass Through 115
- IPv6 Fixed 115
- IPv6 DHCP 116
- IPv6 PPPoE 117
- Traffic Meter 119
- Troubleshooting 121
- Quick Tips 122
- Troubleshoot with the LEDs 122
- Power LED Is Off or Blinking 123
- Power LED Stays Amber 123
- LEDs Never Turn Off 123
- Internet LEDs Is Off 123
- Cannot Log In to the Router 124
- Cannot Access the Internet 125
- Troubleshoot PPPoE 127
- Changes Not Saved 128
- Wireless Connectivity 128
- Supplemental Information 131
- Factory Settings 132
- Supplemental Information 133
- Technical Specifications 134
Related products and manuals for Routers Netgear R6300
Routers Netgear WNDR4000 User Manual
(104 pages)
(104 pages)
Routers Netgear DG834 Operations Instructions
(142 pages)
(142 pages)
Routers Netgear D6200 User Manual
(162 pages)
(162 pages)
Routers Netgear DGB111G Operations Instructions
(268 pages)
(268 pages)
Routers Netgear R6200 User Manual
(131 pages)
(131 pages)
Routers Netgear WNB1100 User Manual
(122 pages)
(122 pages)
Routers Netgear N300 ROUTER WNR2000 User Manual
(146 pages)
(146 pages)
© 2020, manymanuals.com. All rights reserved. | 1.458 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals