Netgear MBR1516 User's Guide download pdf (Page 84)

Advanced Settings

Mobile LTE Broadband 11n Wireless Router MBR1516

• Your company’s network address is 134.177.0.0.

When you first configured your router, two implicit static routes were created. A default route

was created with your ISP as the gateway, and a second static route was created to your

local network for all 192.168.1.x addresses. With this configuration, if you attempt to access a

device on the 134.177.0.0 network, your router forwards your request to the ISP. The ISP

forwards your request to the company where you are employed, and the request is likely to

be denied by the company’s firewall.

In this case you have to define a static route, telling your router that 134.177.0.0 should be

accessed through the ISDN router at 192.168.1.100. In this example:

• The Destination IP Address and IP Subnet Mask fields specify that this static route

applies to all 134.177.x.x addresses.

• The Gateway IP Address field specifies that all traffic for these addresses should be

forwarded to the ISDN router at 192.168.1.100.

• A metric value of 1 will work since the ISDN router is on the LAN.

• Private is selected only as a precautionary security measure in case RIP is activated.

¾ To set up a static route:

1. Select ADVANCED > Advanced > Static Routes to display the following screen:

2. Click Add to display the following screen:

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 215 216

No comments

Netgear MBR1516 User's Guide Page 84