Netgear MBR1516 User's Guide download pdf (Page 41)

NETGEAR genie ADVANCED Home

Mobile LTE Broadband 11n Wireless Router MBR1516

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host

Configuration Protocol (DHCP) and Routing Information Protocol (RIP).

The router is shipped preconfigured to use private IP addresses on the LAN side and to act

as a DHCP server. The router’s default LAN IP configuration is:

• LAN IP address. 192.168.0.1

• Subnet mask. 255.255.255.0

These addresses are part of the designated private address range for use in private networks

and should be suitable for most applications. If your network has a requirement to use a

different IP addressing scheme, you can make those changes in the LAN Setup screen.

Note: If you change the LAN IP address of the router while connected

through the browser, you will be disconnected. You will have to open

a new connection to the new IP address and log in again.

¾ To change the LAN settings:

1. Select ADVANCED > Setup > LAN Setup to display the following screen:

2. Enter the settings that you want to customize. These settings are described in LAN Setup

Screen Settings on page 42.

3. Click Apply to save your changes.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 215 216

No comments

Netgear MBR1516 User's Guide Page 41