Netgear DM602 User Manual download pdf (Page 42)

Reference Manual for the Model DM602 ADSL Modem

5-2 Advanced Configuration of the Modem

This screen shows the following parameters:

Table 5-1. Router Status Fields

Field Description

Firmware Version This field displays the modem firmware version.

LAN Port These IP parameters apply to theLocal Area Network (LAN) of the

modem.

MAC Address This field displays the Ethernet MAC address being used by the LAN

port of the modem.

IP Address This field displays the IP address being used by the ADSL (WAN) port of

the modem. If no address is shown, the modem cannot connect to the

Internet.

IP Subnet Mask This field displays the IP Subnet Mask being used by the ADSL(WAN)

port of the modem.

Modem These parameters apply to the ADSL modem section of the modem.

ADSL Firmware Version This field displays the ADSL chipset firmware version.

Modem Status This field displays the state of the ADSL connection to your service

provider, either “Connecting” or “Connected”

Connect Mode This field displays the protocol used to connect to your service provider.

When the ADSL link comes up, the connection will be either “Fast” or

“Interleaved”, depending on the way the telephone company has

configured its equipment

Down Stream This field displays the connection rate from the service provider to the

modem in bits per second

Up Stream This field displays the connection rate from the modem to the service

provider in bits per second

VPI This field displays the VPI entered in the Setup Wizard or Basic Settings

screen

VCI This field displays the VCI entered in the Setup Wizard or Basic Settings

screen

DM602.book Page 2 Monday, August 12, 2002 6:09 PM

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 65 66

No comments

Netgear DM602 User Manual Page 42