Netgear DM602 User Manual download pdf (Page 26)

Reference Manual for the Model DM602 ADSL Modem

3-2 Preparing Your Computer

In most cases, you should install TCP/IP so that the computer obtains its specific network

configuration information automatically from a DHCP server during bootup.

The Model DM602 modem is shipped preconfigured as a DHCP server. The modem assigns the

following TCP/IP configuration information for one computer only automatically when your

computer is rebooted:

• Computer IP addresses—192.168.0.2

• Subnet mask—255.255.255.0

• Gateway address (the modem)—192.168.0.1

Configuring Windows 95, 98, and ME for TCP/IP Networking

As part of the PC preparation process, if TCP/IP is not already installed, you need to manually

install and configure TCP/IP on your computer. Before starting, locate your Windows CD; you

may need to insert it during the TCP/IP installation process.

Install or Verify Windows Networking Components

To install or verify the necessary components for IP networking:

1. On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2. Double-click the Network icon.

The Network window opens, which displays a list of installed components:

DM602.book Page 2 Monday, August 12, 2002 6:09 PM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 65 66

No comments

Netgear DM602 User Manual Page 26