Netgear PS121v2 User Manual download pdf (Page 24)

NETGEAR USB Multifunction Printer Server PS121v2 User Manual

2-8 Setup

v1.1, September 2006

Set Up Each Additional PC to Use the PS121v2

After you have set up the PS121v2 in your network and connected it to one computer, you need to

set up each additional computer to use the PS121v2. You do this by using the Resource CD to run

the setup according to the steps below.

1. Power on your computer, let the operating system boot up completely, and log in as needed.

2. Insert the Resource CD for the PS121v2 into your CD-ROM drive. The CD main page will

load.

3. Click Set Up the PC to Use an Installed Print Server to install the SmartWizard, which will

allow you to print via the print server.

Your USB Multifunction Print Server is now ready to use. For instructions on using the

multifunction feature, refer to “Reserving a Printer for Exclusive Use by One PC” on page 3-1.

Warning: For Windows 98SE and Windows ME, print manager software from Epson

and from some HP printers can block communications between your PC and

the PS121v2. Uninstall such print manager software before proceeding with

the Add Printer Port Wizard.

Figure 2-5

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 49 50

No comments

Netgear PS121v2 User Manual Page 24