Netgear PS121v2 User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
NETGEAR USB Multifunction Printer Server PS121v2 User Manual
Setup 2-15
v1.1, September 2006
4. Complete the Add Standard TCP/IP Printer Port Wizard as follows:
a. From the Install Printer Software screen selection lists, find the manufacturer and model
of the printer you connected to the USB port on the print server.
If you do not see your make and model of printer in the lists, and you are connected to the
Internet, you can click the Windows Update button to download additional printer
software from the Microsoft Web site, or you can click the Have Disk button to install the
printer software from a disk you have.
b. Click Next to proceed.
If the printer software is already installed on this computer, the Add Printer Wizard will
inform you and let you keep the existing driver.
c. The Name Your Printer screen prompts for a descriptive name and whether you want it to
be the default or not. Enter your choices and then click Next to proceed.
d. On the Printer Sharing screen, accept the “Do not share this printer” option and click Next
to proceed.
5. Print a test page to verify successful printing on your network.
a. Upon completion of the Add Printer Wizard, you will be prompted to print a test page.
b. Check the printer attached to the USB Multifunction Print Server to verify that the test
page printed successfully.
If you are unable to print a test page, see Chapter 4, “Troubleshooting”
Figure 2-15
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 49 50

Comments to this Manuals

No comments