Netgear PS121v2 User Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
NETGEAR USB Multifunction Printer Server PS121v2 User Manual
2-10 Setup
v1.1, September 2006
b. Insert one end (B) of an Ethernet cable into an open Ethernet LAN port in the network
device such as a access point or router and insert the other end (C) into the Ethernet port
on the PS121v2 print server.
c. Turn on your printer.
d. Connect 12 V power adapter to the print server and plug it into a power source.
e. Check the PS121v2 status lights and verify the following:
ERROR light: When the print server is powered on, the ERROR light will turn red
briefly, and then turn off.
ACT light: When the print server is powered on, it it should turn solid green.
f. Verify that your computers are connected to LAN ports on your router, as shown in
Figure 2-1 on page 2-2.
Figure 2-7
B
C
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 49 50

Comments to this Manuals

No comments