Netgear PS121v2 User Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
NETGEAR USB Multifunction Printer Server PS121v2 User Manual
1-6 Introduction
v1.1, September 2006
Diagnostic/Reset Push Button
This button has 2 functions:
Restore the factory default settings
Print a test page containing all current settings
The button is recessed. Use a pin or paper clip to press it.
How to Restore the Factory Default Settings
1. Unplug the Print Server from its power source.
2. Press and hold the diagnostic button. While pressing the button, apply power to the Print
Server and continue pressing the button until the ACT and ERROR LEDs flash alternately.
How to Generate a Diagnostic Printout
1. Ensure that both the Print Server and the attached printer are on.
2. Press the diagnostic button, and hold it in until the ERROR LED flashes slowly.
3. The test page, containing the current settings, will print.
Figure 1-4
Note: PostScript printers are unable to print this page. If you have a PostScript printer, the
test page will not be printed.
Recessed Diagnostic/Reset Button
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 49 50

Comments to this Manuals

No comments