Netgear PS121v2 User Manual download pdf (Page 35)

NETGEAR USB Multifunction Printer Server PS121v2 User Manual

Operation 3-3

v1.1, September 2006

Once the print server is reserved, print operations from other computers will be blocked while you

perform a non-printing operation such as scanning, copying, or faxing. The print server will

automatically become available again to other PCs if you do not use the printer within 5 minutes.

Releasing the Print Server

When you finish the non-printing operation, you can release the print server yourself by clicking

the Release button in the Reserve MFP window shown in Figure 3-2. The print server will

automatically release if it remains idle for 5 minutes. The status icon will change back to the green

checkmark shown in Figure 3-1.

Upgrading the Print Server Software

The SmartWizard lets you check whether there is an update to the print server firmware or

SmartWizard and, if so, lets you upgrade either or both.

To check for updates:

Note: If you have more than one PS121v2 print server on your network, your computer’s

operating system will only be able to connect to the print server selected in the

SmartWizard. If you want to connect to another print server, release the print server

you reserved and select the device you want from the displayed list.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 49 50

No comments

Netgear PS121v2 User Manual Page 35