Netgear ProSafe FS728TP User Manual Page 81

  • Download
  • Add to my manuals
  • Print
  • Page
    / 248
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 80
FS728TP Smart Switch Software Administration Manual
3-44 Managing System Settings
v1.1, September 2009
Enable – Enables topology change notification on the interface. This is the default
value.
Disable – Disables topology change notification on the interface.
Optional TLVs – Select whether optional TLVs are advertised from the interface.
Enable – Enables optional TLVs on the interface. This is the default value.
Disable – Disables optional TLVs on the interface.
LLDP-MED Network Policy
The LLDP-MED Network Policy screen allows network administrators to define LLDP-MED
network policies, which include the application, VLAN ID, VLAN type, user priority and DSCP
value.
LLDP Media Endpoint Discovery (LLDP-MED) increases network flexibility by allowing
different IP systems to coexist on a single network.
LLDP:
Provides detailed network topology information, including what devices are located on the
network, and where the devices are located. For example, what IP phone is connected to what
port, what software is running on what switch, and what port is connected to what PC.
Automatically deploys policies over networks for:
–QoS Policies
Voice VLANs
Provides Emergency Call Service (E-911) via IP Phone location information.
Provides troubleshooting information. LLDP-MED sends network managers alerts for:
Port speed and duplex mode conflicts
QoS policy misconfigurations
To configure LLDP-MED Network Policy:
1. Click System > LLDP > Advanced > LLDP-MED Network Policy. The LLDP-MED
Network Policy screen displays
Page view 80
1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 247 248

Comments to this Manuals

No comments