Netgear ProSafe FS728TP User Manual Page 236

  • Download
  • Add to my manuals
  • Print
  • Page
    / 248
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 235
GS700TP Smart Switch Software Administration Manual
8-6 Maintenance
v1.1, September 2009
Firmware – Downloads the Firmware file.
Boot File – Downloads the Boot file.
Configuration – Downloads the Configuration file.
via TFTP – Select to download the file from the TFTP Server.
via HTTP – Select to download the file via the web browser interface (HTTP) and enter
the file name in the provided box.
TFTP Server IP – Enter the TFTP Server IP Address from which the Firmware, Boot or
Configuration file is downloaded.
Remote Filename – Enter the destination file name to be downloaded.
2. Select Firmware, Boot File or Configuration as the download File Type from the provided
field.
3. Select whether to download via TFTP or via HTTP.
4. If you selected via HTTP, enter the file name in the provided box.
5. If you selected via TFTP,nter the TFTP Server IP address in the provided field.
6. If you selected via TFTP, enter the Remote Filename in the provided field.
7. Click APPLY to download the file. You must reboot the device for the downloaded file
settings to take effect. See “Device Reboot” for detailed instructions on rebooting the device.
File Management
The File Management menu contains the following option:
“Active Image”
Active Image
The Active Image screen enables the user to select which image will be set as active after the next
reset.
To define the active image:
1. Click Maintenance > File Management > Active Image. The Active Image screen displays:
Page view 235
1 2 ... 231 232 233 234 235 236 237 238 239 240 241 ... 247 248

Comments to this Manuals

No comments