Netgear ProSafe FS728TP User Manual Page 177

  • Download
  • Add to my manuals
  • Print
  • Page
    / 248
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 176
FS728TP Smart Switch Software Administration Manual
6-10 Managing Security
v1.1, September 2009
The Basic 802.1x Configuration screen contains the following fields:
Port Based Authentication State – Select whether port-based authentication is enabled
or disabled on the device. The possible field values are:
Disable – Disables port-based authentication on the device.
Enable – Enables port-based authentication on the device.
Authentication Method – Select the authentication method used for port authentication.
The possible field values are:
RADIUS, None – Indicates port authentication is first attempted through the RADIUS
server. If the RADIUS server is inaccessible or not defined, then no authentication
method (None) is used and the session is permitted.
RADIUS – Indicates port authentication is through the RADIUS server.
None – Indicates no authentication method is used to authenticate the port.
Guest VLAN – Select whether the Guest VLAN is enabled or disabled on the device. The
default VLAN cannot be defined as a Guest VLAN. The possible field values are:
Disable – Disables the Guest VLAN on the device. This is the default value.
Figure 6-5
Page view 176
1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 247 248

Comments to this Manuals

No comments