Netgear ProSafe FS728TP User Manual Page 70

  • Download
  • Add to my manuals
  • Print
  • Page
    / 248
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 69
FS728TP Smart Switch Software Administration Manual
Managing System Settings 3-33
v1.1, September 2009
The SNMPv3 Trap Configuration screen contains the following fields:
Recipients IP – Enter the IP address to which the traps are sent.
Notification Type – Select the type of notification sent. The possible field values are:
Traps – Indicates traps are sent.
Informs – Indicates informs are sent.
User Name – Enter the user name. The field range is up to 30 alphanumeric characters.
Security Level – Select the security level attached to the group. Security levels apply to
SNMPv3 only. The possible field values are:
No Authentication – Indicates neither the Authentication nor the Privacy security
levels are assigned to the group.
Authentication – Authenticates SNMP messages and ensures that the SNMP
message’s origin is authenticated.
Privacy – Encrypts SNMP messages.
UDP Port – Enter the UDP port used to send notifications. The default is 162.
Figure 3-18
Page view 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 247 248

Comments to this Manuals

No comments