Netgear ProSafe FS728TP User Manual Page 64

  • Download
  • Add to my manuals
  • Print
  • Page
    / 248
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 63
FS728TP Smart Switch Software Administration Manual
Managing System Settings 3-27
v1.1, September 2009
The SNMPv3 Groups screen contains the following fields:
Group Name – Enter the user-defined group to which access control rules are applied.
The field range is up to 30 characters.
Security Model – Select the SNMP version associated with the group. The possible field
values are:
SNMPv1 – SNMPv1 is defined for the group.
SNMPv2 – SNMPv2c is defined for the group.
SNMPv3 – SNMPv3 is defined for the group.
Security Level – Select the security level attached to the group. Security levels apply to
SNMPv3 only. The possible field values are:
No Authentication – Neither the Authentication nor the Privacy security levels are
assigned to the group.
Authentication – Authenticates SNMP messages and ensures that the SNMP
message’s origin is authenticated.
Privacy – Encrypts SNMP messages.
Operation – Select the group access rights. The possible field values are:
Read – Management access is restricted to read-only. Changes are made to the
assigned SNMP view.
Write – Management access is read-write. Changes are made to the assigned SNMP
view.
Notify – Sends traps for the assigned SNMP view.
2. Select the SNMP group entry.
3. Select the Security Model and Security Level from the lists in the provided fields in the first
row.
4. Specify the group access rights for the selected SNMP views in the Operation provided fields
in the first row.
5. Click APPLY to update the device.
To add a new SNMPv3 group:
1. Click System > SNMP > SNMPv3 > Group Configuration. The SNMPv3 Groups screen
displays.
Page view 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 247 248

Comments to this Manuals

No comments