Netgear ProSafe FS728TP User Manual Page 221

  • Download
  • Add to my manuals
  • Print
  • Page
    / 248
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 220
FS728TP Smart Switch Software Administration Manual
Monitoring the Switch 7-19
v1.1, September 2009
Broadcast Packets – Displays the number of good Broadcast packets received on the
interface since the device was last refreshed. This number does not include Multicast
packets.
Multicast Packets – Displays the number of good Multicast packets received on the
interface since the device was last refreshed.
CRC Errors – Displays the number of CRC and Align errors that have occurred on the
interface since the device was last refreshed.
Undersize Packets – Displays the number of undersized packets (less than 64 octets)
received on the interface since the device was last refreshed.
Oversize Packets – Displays the number of oversized packets (over 1518 octets) received
on the interface since the device was last refreshed.
Fragments – Displays the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the interface since the
device was last refreshed.
Jabbers – Displays the total number of received packets that were longer than 1518
octets. This number excludes frame bits, but includes FCS octets that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral octet (Alignment Error) number. The field range to detect jabbers is
between 20 ms and 150 ms.
Collisions – Displays the number of collisions received on the interface since the device
was last refreshed.
Utilization – Displays the percentage of the interface utilized.
2. Select the History Entry No. from the list in the provided field. The statistics are displayed.
3. To refresh the RMON History Table screen, click REFRESH.
Events Control
The RMON Events Control screen contains fields for defining RMON events.
To configure RMON events control:
1. Click Monitoring > RMON > Advanced > Events Control. The RMON Events Control
screen displays:
Page view 220
1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 247 248

Comments to this Manuals

No comments