Netgear GS748TS User Manual Page 227

  • Download
  • Add to my manuals
  • Print
  • Page
    / 232
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 226
GS700TS Smart Switch Software Administration Manual
Maintenance 8-8
v1.0, June 2009
The Cable Test screen contains the following fields:
Interface – Enter the port to which the cable is connected.
Test Result – Displays the cable test results. Possible values are:
No Cable – Indicates a cable is not connected to the port.
Open Cable – Indicates a cable is connected on only one side.
Short Cable – Indicates a short has occurred in the cable.
OK – Indicates the cable passed the test.
Cable Fault Distance – Displays the distance from the port where the cable error
occurred.
Last Update Displays the last time the port was tested.
Test – Click TEST to perform the cable tests for the selected port.
Cable Length – Displays the approximate cable length. This test can only be performed
when the port is up and operating at 100Mbps or 1 Gbps.
2. On the row containing the interface to be tested, click TEST to test the cable connected to the
interface.
Figure 8-6
Page view 226

Comments to this Manuals

No comments