Netgear GS748TS User Manual Page 221

  • Download
  • Add to my manuals
  • Print
  • Page
    / 232
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 220
GS700TS Smart Switch Software Administration Manual
Maintenance 8-2
v1.0, June 2009
The Device Reboot screen contains the following fields:
Reboot Unit Number – Select the unit to be reset. The possible field values are:
1, 2, 3, 4, 5, 6 – Reboots the stacking member associated with the selected unit
number.
All – Reboots all stacking members.
Check this box and click Apply below to reboot unit(s) – Select the confirmation box to
confirm unit changes.
2. Select a unit number or All as the Reboot Unit Number in the provided field.
3. Check the confirmation box.
4. Click APPLY to reboot the device.
Factory Default
The Factory Default screen allows network managers to reset the device to the factory defaults
shipped with the switch. Restoring factory defaults results in erasing the configuration file.
Note: Selecting this option automatically reboots the device.
The stacking defaults are not restored from this screen, including:
The stacking mode
The stacking cables
The Unit ID numbering
To restore stacking defaults, press the reset button on the front panel of your device. To reset the
device to the factory defaults:
1. Click Maintenance > Reset > Factory Default. The Factory Default screen displays:
Figure 8-1
Page view 220
1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 231 232

Comments to this Manuals

No comments