Netgear GS748TS User Manual Page 172

  • Download
  • Add to my manuals
  • Print
  • Page
    / 232
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 171
GS700TS Smart Switch Software Administration Manual
6-10 Managing Security
v1.0, June 2009
The Basic 802.1x Configuration screen contains the following fields:
Port Based Authentication State – Select whether port-based authentication is enabled
or disabled on the device. The possible field values are:
Disable – Disables port-based authentication on the device.
Enable – Enables port-based authentication on the device.
Authentication Method – Select the authentication method used for port authentication.
The possible field values are:
RADIUS, None – Indicates port authentication is first attempted through the RADIUS
server. If the RADIUS server is inaccessible or not defined, then no authentication
method (None) is used and the session is permitted.
RADIUS – Indicates port authentication is through the RADIUS server.
None – Indicates no authentication method is used to authenticate the port.
Guest VLAN – Select whether the Guest VLAN is enabled or disabled on the device. The
default VLAN cannot be defined as a Guest VLAN. The possible field values are:
Disable – Disables the Guest VLAN on the device. This is the default value.
Enable – Enables using a Guest VLAN for unauthorized ports. If a Guest VLAN is
enabled, the unauthorized port automatically joins the VLAN selected in the VLAN
List field.
Guest VLAN ID – Select the guest VLAN ID from the list of currently defined VLANs.
EAPOL Handling – Select the method of handling EAPOL (Extensible Authentication
Protocol Over LAN) packets when 802.1x authentication is disabled. The possible field
values are:
Filtering – Indicates EAPOL packets are filtered.
Flooding – Indicates EAPOL packets are flooded to all ports.
2. Select Disable or Enable for the Port Based Authentication State in the provided field.
3. If you selected Enable for the Port Based Authentication State, then select the
Authentication Method from the list in the provided field.
4. Select Disable or Enable for the Guest VLAN status in the provided field.
5. If you selected Enable for the Guest VLAN field, then select the VLAN ID from the list in the
provided field.
Page view 171
1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 231 232

Comments to this Manuals

No comments