Netgear GS748TS User Manual Page 128

  • Download
  • Add to my manuals
  • Print
  • Page
    / 232
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 127
GS700TS Smart Switch Software Administration Manual
4-35 Configuring Switching Settings
v1.0, June 2009
Root Port – Displays the port number that offers the lowest cost path from this bridge to
the Root Bridge. This field is significant when the bridge is not the Root Bridge. The
current root port is zero when the device is not connected to the network.
Root Path Cost – Displays the cost of the path from this bridge to the Root Bridge. The
current root path cost is zero when the device is not connected to the network.
MSTP Status
MST ID – Specifies the instance to which the VLAN is assigned.
VID – Displays the VLAN ID.
2. Enter the Bridge Priority in the provided field.
3. Select Hello Time, Max Age, Forward Delay or Spanning Tree Maximum Hops and enter
the value in the provided field.
4. Click APPLY to update the device.
CST Port Configuration
The CSP Port Configuration screen contains parameters for assigning Common Spanning Tree
(CST) values to interfaces.
To configure CST ports on the device:
1. Click Switching > STP > Advanced > CST Port Configuration. The CST Port
Configuration screen displays:
Figure 4-23
Page view 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 231 232

Comments to this Manuals

No comments