GS700TS Smart Switch Software Administration Manual
7-13 Monitoring the Switch
v1.0, June 2009
• Undersize Packets – Displays the number of undersized packets (less than 64 octets)
received on the interface since the device was last refreshed.
• Oversize Packets – Displays the number of oversized packets (over 1518 octets) received
on the interface since the device was last refreshed.
• Fragments – Displays the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the interface since the
device was last refreshed.
• Jabbers – Displays the total number of received packets that were longer than 1518
octets. This number excludes frame bits, but includes FCS octets that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral octet (Alignment Error) number. The field range to detect jabbers is
between 20 ms and 150 ms.
• Collisions – Displays the number of collisions received on the interface since the device
was last refreshed.
• Frames of 64 Bytes – Displays the number of 64-byte frames received on the interface
since the device was last refreshed.
• Frames of 65 to 127 Bytes – Displays the number of 65 to 127 byte frames received on
the interface since the device was last refreshed.
• Frames of 128 to 255 Bytes – Displays the number of 128 to 255 byte frames received on
the interface since the device was last refreshed.
• Frames of 256 to 511 Bytes – Displays the number of 256 to 511 byte frames received on
the interface since the device was last refreshed.
• Frames of 512 to 1023 Bytes – Displays the number of 512 to 1023 byte frames received
on the interface since the device was last refreshed.
• Frames of 1024 to 1522 Bytes – Displays the number of 1024 to 1522 byte frames
received on the interface since the device was last refreshed.
RMON Summary Statistics
• Interface – Displays the port or LAG for which statistics are displayed.
• Drop Events – Displays the number of dropped events that have occurred on the interface
since the device was last refreshed.
• Received Bytes – Displays the number of octets received on the interface since the device
was last refreshed. This number includes bad packets and FCS octets, but excludes
framing bits.
Comments to this Manuals