Netgear GS748TS User Manual Page 159

  • Download
  • Add to my manuals
  • Print
  • Page
    / 232
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 158
GS700TS Smart Switch Software Administration Manual
Configuring QoS 5-10
v1.0, June 2009
Queue – Select the traffic-forwarding queue to which the DSCP is mapped. Four traffic
priority queues are supported (Lowest, Low, Normal and High). The High Queue is
reserved for special traffic and is not recommended for use.
Restore Default Mapping
Restore Defaults – Restore the DSCP Mapping device factory default values. The
possible field values are:
Checked – Restores the factory default settings for DSCP mapping values.
Unchecked – Maintains the current DSCP mapping settings.
2. Select the Queue values for each DSCP In value in the provided fields.
3. Check or uncheck the Restore Defaults box in the provided field.
4. Click APPLY to update the device.
Creating Class Mapping
One IP ACL and/or one MAC ACL comprise a class map. Class maps are configured to match
packet criteria, and are matched to packets on a first-fit basis. For example, Class Map A is
assigned packets based only on an IP based ACL or a MAC-based ACL. Class Map B is assigned
to packets based on both an IP-based and a MAC based ACL.
To define class maps:
1. Click QoS > CoS > Advanced > Class Mapping. The Class Mapping screen displays:
The Class Map screen contains the following fields:
Class-Map Name – Displays the user-defined name of the class map.
Figure 5-7
Page view 158
1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 231 232

Comments to this Manuals

No comments