Netgear GS748TS User Manual Page 69

  • Download
  • Add to my manuals
  • Print
  • Page
    / 232
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 68
GS700TS Smart Switch Software Administration Manual
Managing System Settings 3-34
v1.0, June 2009
The SNMPv3 Trap Configuration screen contains the following fields:
Recipients IP – Enter the IP address to which the traps are sent.
Notification Type – Select the type of notification sent. The possible field values are:
Traps – Indicates traps are sent.
Informs – Indicates informs are sent.
User Name – Enter the user name. The field range is up to 30 alphanumeric characters.
Security Level – Select the security level attached to the group. Security levels apply to
SNMPv3 only. The possible field values are:
No Authentication – Indicates neither the Authentication nor the Privacy security
levels are assigned to the group.
Authentication – Authenticates SNMP messages and ensures that the SNMP
message’s origin is authenticated.
Privacy – Encrypts SNMP messages.
UDP Port – Enter the UDP port used to send notifications. The default is 162.
Filter Name – Select the SNMP filter name from the list of SNMP Notification filters.
Timeout – Enter the amount of time (in seconds) the device waits before re-sending
informs. The default is 15 seconds.
Retries – Enter the maximum amount of times the device re-sends an inform request if a
response is not received. The default is 3 times.
2. Enter the Recipients IP address in the provided field in the first row.
3. Select either Traps or Informs in the Notification Type provided field in the first row.
4. Enter the User Name in the provided field in the first row.
5. Select the Security Level from the list in the provided field in the first row.
6. Enter the UDP Port in the provided field in the first row.
7. Select the Filter Name from the list in the provided field in the first row.
8. Enter the Timeout and Retries in the provided fields in the first row.
9. Click APPLY to update the device.
To add a new trap:
1. Click System > SNMP > SNMPv3 > Trap Configuration. The SNMPv3 Trap Configuration
screen displays.
Page view 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 231 232

Comments to this Manuals

No comments