Netgear GS748TS User Manual Page 134

  • Download
  • Add to my manuals
  • Print
  • Page
    / 232
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 133
GS700TS Smart Switch Software Administration Manual
4-41 Configuring Switching Settings
v1.0, June 2009
The MST Port Configuration screen contains the following fields:
Select MST – Select an MST to be displayed.
Interface – Displays the Port or LAG for which the MSTP settings are displayed.
Port Priority – Defines the interface priority for the specified instance. The field range is
0-240. The default value is 128.
Port Path Cost – Indicates the port contribution to the Spanning Tree instance. The range
should always be 1-200,000,000. The field default is 100.
•Port ID – Indicates the port priority and interface number of the source port.
•Port Mode – Indicates MST is enabled on the interface. The possible field values are:
Enabled – Enables MST on the interface.
Disabled – Disables MST on the interface.
Port Forwarding State – Indicates whether the port is enabled for the specific instance.
The possible field values are:
Disabled — Indicates that STP is currently disabled on the port.
Blocking — Indicates that the port is currently blocked and cannot forward traffic or
learn MAC addresses.
Figure 4-26
Page view 133
1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 231 232

Comments to this Manuals

No comments