Netgear GS748TS User Manual Page 165

  • Download
  • Add to my manuals
  • Print
  • Page
    / 232
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 164
GS700TS Smart Switch Software Administration Manual
Managing Security 6-3
v1.0, June 2009
The RADIUS screen contains the following fields:
Host IP AddressEnter the RADIUS Server IP address.
Authentication Port – Enter the authentication port number. The authentication port is
used to verify the RADIUS Server authentication. The field default is 1812.
Number of Retries – Enter the number of transmitted requests sent to the RADIUS
Server before a failure occurs. Possible field values are 1-10. The default value is 3.
Timeout for Reply – Enter the amount of time (in seconds) the device waits for an answer
from the RADIUS Server before retrying the query, or switching to the next server.
Possible field values are 1-30. The default value is 3.
Dead Time – Enter the default amount of time (in minutes) that a RADIUS Server is
bypassed for service requests. The range is 0-200. The default value is 0.
Key String – Enter the default key string used for authenticating and encrypting all
RADIUS-communications between the device and the RADIUS Server. This key must
match the RADIUS encryption.
Usage Type – Select the RADIUS Server usage type. The default value is Login. The
possible field values are:
Login – Indicates the RADIUS Server is used for authenticating user names and
passwords.
802.1x – Indicates the RADIUS Server is used for 802.1x authentication.
All – Indicates the RADIUS Server is used for authenticating user names and
passwords, and 802.1x port authentication.
Figure 6-2
Page view 164
1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 231 232

Comments to this Manuals

No comments