Netgear XM128 ISDN User Manual download pdf (Page 50)

Reference Guide for the Model XM128 ISDN Digital Modem

6-2 ISDN Overview

Dialing Out Using ISDN Mode Optional Speech Bearer Service

The Model XM128 modem supports ISDN data utilizing Speech Bearer Service. To enable this

function, you need to set S-register S83 bit 7 to 1 (ATS83.7=1). This function is useful in the areas

where ISDN service providers charge lower usage rates for voice (speech) calls. To enable this

function, enter:

ATS83.7=1

To disable it, enter:

ATS83.7=0

Dialing Out for Analog Adapter Port 1

Using the A command following the ATD tells your Model XM128 modem to switch the call to

analog adapter port PHONE 1, when dialing is complete. Enter:

ATDA17146930762

Dialing Out for Analog Adapter Port 2

Using the B command following the ATD tells your Model XM128 modem to automatically

switch the call to analog adapter port PHONE 2, when dialing is complete. Enter:

ATDB17146930762

Manually Switching Communication Modes

The manual switching function is necessary only if your communication software does not allow

you to change your dial-up string.

Note:

You must have an analog modem connected to your plain old telephone service

(POTS) port before you issue this command.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 155 156

No comments

Netgear XM128 ISDN User Manual Page 50