Netgear XM128 ISDN User Manual download pdf (Page 108)

Reference Guide for the Model XM128 ISDN Digital Modem

C-6 AT Command Set Reference

JSn n=0-255

*32

Sub-threshold for MPPP in Kbps unit

KAxn n=0-63

Add-persist time interval for BOD; BOD disabled if n=0

x= M(in Minute unit) or S(in Second unit)

KSxn n=0-63

Sub-persist time interval for BOD; BOD disabled if n=0

x= M(in Minute unit) or S(in Second unit)

Ln n=0-3

2 *

Speaker volume control. The higher the value, the higher the volume.

Mn M=0-2 Speaker control.

M0 Speaker always off.

M1 * Speaker on until call is answered.

M2 Speaker always on.

Nn n=0-3

3 *

Ring volume control. The No command disables the audio ring function.

O Return to online state

Pn n=0-6 D channel protocol selection (USA) for American version

P0 * Northern Telecom proprietary ISDN

P1 National ISDN 1 (1 SPID)

P2 National ISDN 1 (2 SPID)

P3 Reserved

P4 AT&T custom point-to-point

P5 AT&T custom point-to-multipoint (1 SPID)

P6 AT&T custom point-to-multipoint (2 SPID)

Qn n=0-1 Result code displayed. See also S-register 23.7. For a description of Extended

S-registers, refer to Table D-4 on page D-5 in Appendix D, “Status Registers

and Result Codes."

Q0 * The Model XM128 modem returns result code.

Q1 The Model XM128 modem does not return result code.

Sr.b=n Set bit b of S-register r to value n. The value n is a binary digit 0 or 1.

Sr.b? Display value of bit b of S-register r.

Sr=n Set S-register r to value n, which must be a decimal number between 0 and

255.

Sr? Display value stored in S-register r.

Table C-1. Basic AT command set (continued)

Command Options Function and description

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 155 156

No comments

Netgear XM128 ISDN User Manual Page 108