Netgear XM128 ISDN User Manual download pdf (Page 42)

Reference Guide for the Model XM128 ISDN Digital Modem

4-8 Configuration

For example, if the protocol you want is PPP, type the command ATB40&O2. For other X.75

or V.110 protocol options, refer to Appendix C, “AT Command Set Reference.”

Assign the appropriate MSN telephone numbers, using the AT commands in Table 4-6.

For example, to assign an MSN number for a V.120 call, type the command AT&ZI2=5553434.

Type the AT command AT&W0Z0 to store the information into NVRAM.

Table 4-5. AT commands for setting protocols

Protocol AT command

X.75 ATB00&O2

V.110 user rate - 38400 bps ATB18&O2

V.120 ATB20&O2

PPP ATB40&O2

Table 4-6. AT commands for setting MSN

Multiple subscriber number AT command

X.75 telephone number AT&ZI0=telephone number

V.110 telephone number AT&ZI1=telephone number

V.120 telephone number AT&ZI2=telephone number

PPP telephone number AT&ZI3=telephone number

ISDN Data (Protocol autodetection) AT&ZI4=telephone number

PHONE 1 AT&ZI6=telephone number

PHONE 2 AT&ZI7=telephone number

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 155 156

No comments

Netgear XM128 ISDN User Manual Page 42