Netgear WNDAP350 User Manual Page 99

  • Download
  • Add to my manuals
  • Print
  • Page
    / 136
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 98
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Advanced Configuration 4-11
v1.1, November 2009
When you click the Edit button, you must enter the profile name and the MAC address
(physical address) of the other bridge mode wireless station in the fields provided. WEP,
WPA-PSK, or WPA2-PSK are supported. WPA2-PSK can (and should) be used to protect this
communication.
The screens used to configure these options are located by selecting Wireless Bridge under the
Configuration tab (see Figure 4-6 below).
To configure bridge settings on the Bridging page shown in Figure 4-6 above, follow these steps:
1. Select the Enable Wireless Bridging option.
2. Select one of the bridge mode options, Wireless Point to Point Bridge, or Wireless Point to
Multi-Point Bridge.
3. Select Enable Wireless Client Association, if you wish.
4. Click Edit to edit the security profile of the wireless bridge settings, as shown in Figure 4-7
below.
Figure 4-6 Enable Wireless Point-to-Point Bridge
Page view 98
1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 135 136

Comments to this Manuals

No comments