Netgear WNDAP350 User Manual download pdf (Page 65)

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

Basic Installation and Configuration 2-45

v1.1, November 2009

3. Check the Turn Access Control On radio box to enable Access Control feature.

4. Select the desired Access Control Database options. The options are:

• Local MAC Address Database – The Access Point will use the local MAC address table

for Access Control. This is the default.

• RADIUS MAC Address Database – The Access Point will use the MAC address table

located on the external RADIUS server on the LAN for Access Control. If you choose this

database, you must configure the RADIUS Server Settings first (see “Configuring the

RADIUS Server Settings” on page 2-29).

5. The Trusted Wireless Stations list shows any wireless stations you have entered. If you have

not entered any wireless stations this list will be empty. To delete an existing entry, select it

and then click Delete.

6. Click Refresh to refresh the Available Wireless Stations list found in your area.

7. Select the stations from the list of Available Wireless Stations found in your area, or enter the

MAC address of a station to add a new station manually. (You can usually find the MAC

address printed on the bottom of the wireless adapter.)

Figure 2-24 Configure MAC authentication

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 135 136

No comments

Netgear WNDAP350 User Manual Page 65