Netgear WNDAP350 User Manual Page 102
- Page / 136
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
4-14 Advanced Configuration
v1.1, November 2009
Configuring a Point-to-Multi-Point Wireless Bridge
To configure a point-to-multi-point wireless bridge as shown in Figure 4-9:
1. Under the Configuration tab, select Wireless Bridge. Then, select Bridging. The Bridging
screen displays.
2. Configure the Operating Mode of the WNDAP350 wirelss access points.
• WNDAP350 (AP1) on LAN Segment 1 in Point-to-Point Bridge mode with the Remote
MAC Address of AP2.
• Because it is in the central location, configure WNDAP350 (AP2) on LAN Segment 2 in
Point-to-Multi-Point Bridge mode. The MAC addresses of the adjacent APs are required
in AP2.
• Configure the WNDAP350 (AP3) on LAN 3 in Point-to-Point Bridge mode with the
Remote MAC Address of AP2.
3. Verify the following parameters for all access points:
• Verify that the LAN network configuration the WNDAP350 wirelss access points are
configured to operate in the same LAN network address range as the LAN devices
• Only one access point is configured in Point-to-Multi-Point Bridge mode, and all the
others are in Point-to-Point Bridge mode.
• All access points must be on the same LAN. That is, all the APs LAN IP address must be
in the same network.
Figure 4-9 Wireless point-to-multipoint bridge setup
'Master' AP in
Point-to-Multi-Point
Bridge Mode
LAN
Segment 1
192.168.0.1
Router
AP in
Point-to-Point
Bridge Mode
Hub or Switch
LAN
Segment 3
AP in
Point-to-Point
Bridge Mode
LAN
Segment 2
Hub or Switch
AP1
ETHERNET
RESET
5-12V DC
AP3
ETHERNET
RESET
5-12V DC
AP2
ETHERNET
RESET
5-12V DC
- ProSafe Dual Band 1
- Wireless-N Access Point 1
- WNDAP350 Reference 1
- Industry Canada statements 6
- Contents 7
- About This Manual 11
- How to Print This Manual 12
- Revision History 12
- Chapter 1 13
- Introduction 13
- Key Features 14
- Introduction 1-3 15
- 1-4 Introduction 16
- System Requirements 17
- What’s In the Box? 18
- Hardware Description 18
- Front Panel 19
- Rear Panel 20
- Chapter 2 21
- Figure 2-1 23
- Figure 2-2 Login screen 25
- Figure 2-5 IP Settings 28
- Setting Basic IP Options 33
- Wireless Settings 34
- Setting up a Security Profile 51
- Configuring WEP 53
- Configuring WPA with RADIUS 55
- Configuring WPA2 with RADIUS 57
- Configuring WPA-PSK 60
- Configuring WPA2-PSK 61
- Chapter 3 67
- Management 67
- 3-2 Management 68
- Remote Console 69
- CLI Commands 70
- Management 3-5 71
- Configuration File Management 72
- Restoring Saved Settings 73
- 3-8 Management 74
- Management 3-9 75
- 3-10 Management 76
- Enabling the SysLog Server 77
- 3-12 Management 78
- Appendix B, “Related 79
- Documents.) 79
- 3-14 Management 80
- Management 3-15 81
- Table 3-2. Statistics Fields 81
- 3-16 Management 82
- Enabling Rogue AP Detection 83
- 3-18 Management 84
- Viewing Rogue AP Statistics 85
- 3-20 Management 86
- Figure 3-15 Unknown APs list 86
- Packet Capture 87
- 3-22 Management 88
- Chapter 4 89
- Advanced Configuration 89
- 4-2 Advanced Configuration 90
- Hotspot Settings 91
- 4-4 Advanced Configuration 92
- Advanced Configuration 4-5 93
- 4-6 Advanced Configuration 94
- Advanced Configuration 4-7 95
- 4-8 Advanced Configuration 96
- Advanced Configuration 4-9 97
- Enabling Wireless Bridging 98
- Advanced Configuration 4-11 99
- 4-12 Advanced Configuration 100
- Advanced Configuration 4-13 101
- 4-14 Advanced Configuration 102
- Advanced Configuration 4-15 103
- 4-16 Advanced Configuration 104
- Troubleshooting and Debugging 105
- Chapter 5 105
- The LAN light is not lit 106
- Appendix A 109
- Technical Specifications 111
- Appendix B 113
- Related Documents 113
- B-2 Related Documents 114
- Appendix C 115
- Command Line Reference 115
- C-2 Command Line Reference 116
- Command Line Reference C-3 117
- C-4 Command Line Reference 118
- Command Line Reference C-5 119
- C-6 Command Line Reference 120
- Command Line Reference C-7 121
- C-8 Command Line Reference 122
- Command Line Reference C-9 123
- C-10 Command Line Reference 124
- Command Line Reference C-11 125
- C-12 Command Line Reference 126
- Command Line Reference C-13 127
- C-14 Command Line Reference 128
- Numerics 129
Related products and manuals for WLAN access points Netgear WNDAP350
WLAN access points Netgear ME101 User Manual
(23 pages)
(23 pages)
WLAN access points Netgear WNAP320 User's Guide
(126 pages)
(126 pages)
WLAN access points Netgear WNDAP620 User Manual
(172 pages)
(172 pages)
WLAN access points Netgear WN604 User Manual
(70 pages)
(70 pages)
WLAN access points Netgear WAG102 User Manual
(102 pages)
(102 pages)
WLAN access points Netgear WGR614 v4 User Manual
(152 pages)
(152 pages)
WLAN access points Netgear MA101 User Manual
(67 pages)
(67 pages)
© 2020, manymanuals.com. All rights reserved. | 0.665 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals