Netgear WNDAP350 User Manual Page 109

  • Download
  • Add to my manuals
  • Print
  • Page
    / 136
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 108
Default Settings and Technical Specifications A-1
v1.1, November 2009
Appendix A
Default Settings and Technical Specifications
This appendix provides the factory default settings and technical specifications for the ProSafe
Dual Band Wireless-N Access Point WNDAP350.
Factory Default Settings
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in Table A-1 below.
Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. Access Point Default Configuration Settings
Feature Description
AP Login
User Login URL 192.168.0.237
User Name (case sensitive) admin
Login Password (case sensitive) password
Ethernet Connection
Static IP Address 192.168.0.210
Ethernet MAC Address See bottom label.
Port Speed 10/100/1000
Local Network (LAN)
Lan IP 192.168.1.1
Subnet Mask 255.255.255.0
Gateway Address 0.0.0.0
DHCP Server Disabled
Page view 108
1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 135 136

Comments to this Manuals

No comments