Netgear WNDAP350 User Manual download pdf (Page 84)

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

3-18 Management

v1.1, November 2009

1. Under the Configuration tab on the main menu, select Security, select Advanced from the

sidebar, and then select Rogue AP. The Rogue AP screen displays, as shown in Figure 3-8

below.

2. Check the Turn Rogue AP Detection On radio box to enable rogue AP detection and click

Apply.

If you enable Rogue AP Detection, the AP continuously scans the wireless network and

collects information about all APs heard on its channel.

3. You can Import AP List from a File. See “Importing Rogue AP List from a File” on page 3-18

for more information.

4. Under the Unknown AP List, click Refresh to discover the APs.

5. Click Move to add any AP to the Known AP List.

6. Click Delete to remove an AP from the Known AP List.

7. Click Apply to save your change.

Importing Rogue AP List from a File

To replace the existing AP list:

Figure 3-14 Enable Rogue AP detection

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 135 136

No comments

Netgear WNDAP350 User Manual Page 84