Netgear WNDAP350 User Manual download pdf (Page 49)

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

Basic Installation and Configuration 2-29

v1.1, November 2009

• WPA-PSK (Preshared Key)

Record the WPA-PSK key. Key: ___________________________________

• WPA RADIUS Settings. For WPA, record the following settings for the primary and

secondary RADIUS servers:

Server Name/IP Address: Primary _________________

Secondary __________________

Port: ___________________________________

Shared Secret: ___________________________________

Use the procedures described in the following sections to configure the WNDAP350. Store this

information in a safe place.

Configuring the RADIUS Server Settings

You can setup or modify the RADIUS Server settings to compliment Network Authentication

security options. The RADIUS Server must be used with Legacy 802.1x, and can be used with

WPA and WPA2 Network Authentication. When using a RADIUS Server, the RADIUS Server

settings must be configured before completing the Network Authentication security profile (see

“Configuring WPA with RADIUS” on page 2-35, “Configuring WPA2 with RADIUS” on

page 2-37, or “Configuring WPA and WPA2 with RADIUS” on page 2-38 for specifics on

implementing these security options).

To set up or modify the RADIUS Server Settings:

1. From your Web browser, log in to the WNDAP350 using the default LAN address of

http://192.168.0.237, user name admin and password password, or use the LAN address and

password that you set up.

2. Under the Configuration tab, select Security on the main menu, select Advanced from the

left panel, and then select RADIUS Server Settings. The RADIUS Server Settings screen

displays, as shown in Figure 2-14.

Note: The RADIUS Server Settings apply to all profiles. They only need to be configured

once per wireless access point.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 135 136

No comments

Netgear WNDAP350 User Manual Page 49