Netgear WNDAP380Rv2 User Manual download pdf (Page 49)

Wireless Configuration and Security

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R

4. Specify the settings of the Profile Definition section of the Edit Security Profile screen as

explained in the following table:

Setting Description

Profile Name Enter a unique name of the wireless security profile that makes it easy to

recognize the profile. The default names are NETGEAR, NETGEAR-1,

NETGEAR-2, and so on, through NETGEAR-7. Y

ou can enter a value of up to

32 alphanumeric characters.

Wireless Network Name

(SSID)

The wireless network name (SSID) for the wireless security profile. The default

names depend on the selected radio band:

• 802.1

1b//jointfilesconvert/35013/bg/ng. The default names are NETGEAR_11ng,

NETGEAR_11ng-1, NETGEAR_1

1ng-2, and so on, through

NETGEAR_11ng-7 for the eighth profile.

• 802.1

1a/na. The default names are NETGEAR_11na, NETGEAR_11na-1,

NETGEAR_11na-2, and so on, through NETGEAR_1

1na-7 for the eighth

profile.

Broadcast Wireless

Network Name (SSID)

Select the Ye

s radio button to enable the wireless access point to broadcast its

SSID, allowing wireless clients that have a null (blank) SSID to adopt the

wireless access point’s SSID.

Yes is the default setting. To prevent the SSID

from being broadcast, select the No radio button.

5. Specify the settings of the Authentication Settings section of the Edit Security Profile screen

as explained in the following table.

Setting Description

Network Authentication

and Data Encryption

Note: The data

encryption fields that

display onscreen

depend on your

selection from the

Network Authentication

drop-down menu.

Open System This is the default setting. Use an open system without any

encryption or with WEP encryption.

See Configure an Open System with WEP or Shared Key

with WEP on page 51.

Shared Key Use WEP encryption and enter at least one shared key.

See Configure an Open System with WEP or Shared Key

with WEP on page 51.

Legacy 802.1X Configure the RADIUS server settings. Encryption is not

supported.

See Configure Legacy 802.1X on page 52.

WPA with Radius Configure the RADIUS server settings and select TKIP or

TKIP +

AES encryption.

See Configure WP

A with RADIUS, WPA2 with RADIUS,

and WPA & WPA2 with RADIUS on page 53.

WPA2 with Radius Configure the RADIUS server settings and select AES or

TKIP +

AES encryption.

See Configure WP

A with RADIUS, WPA2 with RADIUS,

and WPA & WPA2 with RADIUS on page 53.

Note: Select this setting only if all clients support WPA2.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 151 152

Comments to this Manuals

No comments

Netgear WNDAP380Rv2 User Manual Page 49

Comments to this Manuals

Related products and manuals for WLAN access points Netgear WNDAP380Rv2