Netgear WNDAP380Rv2 User Manual download pdf (Page 64)

Management

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R

Enable Remote Management

This section describes the different options for remote management.

• SNMP Management

• Secure Shell and Telnet Management

Both Simple Network Management Protocol (SNMP) and the remote console Secure Shell

(SSH) are enabled by default, which allows for remote management of the wireless access

point from a client running SNMP management software, as well as from an SSH client.

The

Telnet console is disabled by default.

SNMP Management

The SNMP screen lets you configure the IP address of the SNMP manager, the community

names, and the trap information.

 To set up an SNMP management interface:

1. Select Maintenance > Remote Management > SNMP.

The SNMP screen displays:

2. Specify the settings as explained in the following table:

Setting Description

SNMP Select the Enable radio button to allow the SNMP network management

software, such as HP OpenView, to manage the wireless access point

through SNMPv1/v2 protocol. By default, the Disable radio button is

selected.

Read-Only Community Name Enter the community string to allow the SNMP manager to read the

wireless access point’

s Management Information Base (MIB) objects. The

default is public.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 151 152

No comments

Netgear WNDAP380Rv2 User Manual Page 64