Netgear WNDAP380Rv2 User Manual download pdf (Page 18)

Installation and Basic Configuration

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R

Active LED. The Active LED is lit or blinks green when there is Ethernet traffic.

LAN LED. The LAN LED indicates the LAN speed for the LAN port: green for

1000 Mbps and amber for 100 Mbps or 10 Mbps. If the LAN LED is not lit, make

sure that the Ethernet cable is securely attached at both ends.

2.4

WLAN LED. The 2.4 GHz WLAN LED is lit or blinks green when the wireless

LAN (WLAN) is ready.

5 GHz

WLAN LED. The 5 GHz WLAN LED is lit or blinks green when the WLAN is

ready.

The default IP address of your wireless access point is 192.168.0.100. By default, the DHCP

client on the wireless access point is disabled so you can log in using the default IP address.

 To log in to the wireless access point:

1. Open a web browser such as Microsoft Internet Explorer 8.0 or later, or Mozilla

Firefox 18.0 or later.

2. Connect to the wireless access point by entering its default address of 192.168.0.100

into

your browser (use http and not https).

The Login screen displays:

3. Enter the default user name of admin and the default password of password.

4. Click Login.

The web browser displays the basic General system settings screen under the

Configuration tab of the main menu:

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 151 152

No comments

Netgear WNDAP380Rv2 User Manual Page 18