Netgear WGM124 User Manual download pdf (Page 75)

NETGEAR Wireless Router Setup Manual

Preparing Your Network C-19

December 2004

If not already selected, select Built-in Ethernet in the Configure list.

3. If not already selected, Select Using DHCP in the TCP/IP tab.

4. Click Save.

Verifying TCP/IP Properties for Macintosh Computers

After your Macintosh is configured and has rebooted, you can check the TCP/IP configuration by

returning to the TCP/IP Control Panel. From the Apple menu, select Control Panels, then TCP/IP.

The panel is updated to show your settings, which should match the values below if you are using

the default TCP/IP settings that NETGEAR recommends:

• The IP Address is between 192.168.1.2 and 192.168.1.254

• The Subnet mask is 255.255.255.0

• The Router address is 192.168.1.1

If you do not see these values, you may need to restart your Macintosh or you may need to switch

the “Configure” setting to a different option, then back again to “Using DHCP Server”.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 104 105

No comments

Netgear WGM124 User Manual Page 75