Netgear WGM124 User Manual download pdf (Page 73)

NETGEAR Wireless Router Setup Manual

Preparing Your Network C-17

December 2004

Verifying TCP/IP Properties for Windows XP, 2000, and NT4

To check your PC’s TCP/IP configuration:

1. On the Windows taskbar, click the Start button, and then click Run.

The Run window opens.

2. Type cmd and then click OK.

A command window opens

3. Type ipconfig /all

Your IP Configuration information will be listed, and should match the values below if you are

using the default TCP/IP settings that NETGEAR recommends for connecting through a

router or gateway:

• The IP address is between 192.168.1.2 and 192.168.1.254

• The subnet mask is 255.255.255.0

•The TCP/IP Properties dialog box now

displays.

• Click the IP Address tab.

• Select the radio button marked Obtain an IP

address from a DHCP server.

• Click OK. This completes the configuration

of TCP/IP in Windows NT.

Restart the PC.

Repeat these steps for each PC with this version

of Windows on your network.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 104 105

No comments

Netgear WGM124 User Manual Page 73