Netgear RP614 User Manual download pdf (Page 60)

Reference Manual for the Model RP614 Web Safe Router

6-2 Maintenance

This screen shows the following parameters:

Table 6-1. Menu 3.2 - System Status Fields

Field Description

System Name This field displays the Host Name assigned to the router.

Firmware Version This field displays the router firmware version.

WAN Port These parameters apply to the Internet (WAN) port of the router.

IP Address This field displays the IP address being used by the Internet (WAN) port

of the router. If no address is shown, the router cannot connect to the

Internet.

IP Subnet Mask This field displays the IP Subnet Mask being used by the Internet (WAN)

port of the router.

DHCP If set to None, the router is configured to use a fixed IP address on the

WAN.

If set to Client, the router is configured to obtain an IP address

dynamically from the ISP.

LAN Port These parameters apply to the Local (WAN) port of the router.

IP Address This field displays the IP address being used by the Local (LAN) port of

the router. The default is 192.168.0.1

IP Subnet Mask This field displays the IP Subnet Mask being used by the Local (LAN)

port of the router. The default is 255.255.255.0

DHCP If set to None, the router will not assign IP addresses to local PCs on the

LAN.

IfsettoServer,therouterisconfiguredtoassignIPaddressestolocal

PCs on the LAN.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 106 107

No comments

Netgear RP614 User Manual Page 60